Overview: ACM8 unit converts one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled fuse protected outputs. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs. Agency Listings Specifications - One (1) common power input (board and lock power). - Two (2) isolated power inputs (one (1) for board power and one (1) for lock/hardware power). - Eight (8) fuse protected Fail-Safe and/or Fail-Secure 12VDC power outputs. - Any power output may be converted to dry form "C" relay output. - Eight (8) fuse protected 12VDC auxiliary power outputs (unswitched). - Eight (8) normally open (NO) inputs. - Eight (8) open collector inputs. - Any combination of the above. - Fire Alarm Disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs. - Normally open (NO) or normally closed (NC) dry contact input. - Polarity reversal input FACP signaling circuit. Board Installation Instructions in PDF format |
    Security Design Services family of companies securityideasvar.com | cctvhardware.com | allkindscable.com | securityideas.com | buyviconcctv.com XML Product Listing Sitemap XML format |